Muterlle, Palloma / Molinari, Alberto / Perina, Matteo: Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY MIM - MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY METAL INJECTION MOLDING (MIM) - Taschenbuch
[ED: Taschenbuch / Paperback], [PU: LAP Lambert Academic Publishing], The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix., DE, [SC: 0.00], Neuware, gewerbliches Angebot, 152, Selbstabholung und Barzahlung, PayPal, Offene Rechnung, Banküberweisung, De internationale scheepvaart
Muterlle, Palloma / Molinari, Alberto / Perina, Matteo: Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY MIM - MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY METAL INJECTION MOLDING (MIM) - Taschenbuch
[ED: Taschenbuch / Paperback], [PU: LAP Lambert Academic Publishing], The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix., DE, [SC: 0.00], Neuware, gewerbliches Angebot, 152, Selbstabholung und Barzahlung, PayPal, Offene Rechnung, Banküberweisung, Spedizioni internazionali
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix. Buch (fremdspr.) Palloma Muterlle#Alberto Molinari#Matteo Perina Taschenbuch, LAP LAMBERT Academic Publishing, 16.09.2010, LAP LAMBERT Academic Publishing, 2010
Orellfuessli.ch
Nr. 24434571. Versandkosten:Lieferzeiten außerhalb der Schweiz 3 bis 21 Werktage, , Versandfertig innert 6 - 9 Werktagen, zzgl. Versandkosten. (EUR 17.23) Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix. Buch (fremdspr.) Palloma Muterlle#Alberto Molinari#Matteo Perina Taschenbuch, LAP LAMBERT Academic Publishing, 17.09.2010, LAP LAMBERT Academic Publishing, 2010
Orellfuessli.ch
Nr. 24434571. Versandkosten:Lieferzeiten außerhalb der Schweiz 3 bis 21 Werktage, , Versandfertig innert 3 - 5 Werktagen, spese di spedizione aggiuntive. (EUR 16.41) Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix. Bücher, Hörbücher & Kalender / Bücher / Sachbuch / Herstellung & Technik / Herstellungs- & Verfahrenstechnik
Dodax.de
Nr. LAPFQ6H9EDO. Versandkosten:, Lieferzeit: 5 Tage, DE. (EUR 0.00) Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Muterlle, Palloma / Molinari, Alberto / Perina, Matteo:
Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY MIM - MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY METAL INJECTION MOLDING (MIM) - Taschenbuch
[ED: Taschenbuch / Paperback], [PU: LAP Lambert Academic Publishing], The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST sp… Mehr…
[ED: Taschenbuch / Paperback], [PU: LAP Lambert Academic Publishing], The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix., DE, [SC: 0.00], Neuware, gewerbliches Angebot, 152, Selbstabholung und Barzahlung, PayPal, Offene Rechnung, Banküberweisung, De internationale scheepvaart<
Muterlle, Palloma / Molinari, Alberto / Perina, Matteo:
Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY MIM - MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY METAL INJECTION MOLDING (MIM) - Taschenbuch
[ED: Taschenbuch / Paperback], [PU: LAP Lambert Academic Publishing], The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST sp… Mehr…
[ED: Taschenbuch / Paperback], [PU: LAP Lambert Academic Publishing], The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix., DE, [SC: 0.00], Neuware, gewerbliches Angebot, 152, Selbstabholung und Barzahlung, PayPal, Offene Rechnung, Banküberweisung, Spedizioni internazionali<
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal i… Mehr…
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix. Buch (fremdspr.) Palloma Muterlle#Alberto Molinari#Matteo Perina Taschenbuch, LAP LAMBERT Academic Publishing, 16.09.2010, LAP LAMBERT Academic Publishing, 2010<
Nr. 24434571. Versandkosten:Lieferzeiten außerhalb der Schweiz 3 bis 21 Werktage, , Versandfertig innert 6 - 9 Werktagen, zzgl. Versandkosten. (EUR 17.23)
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal i… Mehr…
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix. Buch (fremdspr.) Palloma Muterlle#Alberto Molinari#Matteo Perina Taschenbuch, LAP LAMBERT Academic Publishing, 17.09.2010, LAP LAMBERT Academic Publishing, 2010<
Nr. 24434571. Versandkosten:Lieferzeiten außerhalb der Schweiz 3 bis 21 Werktage, , Versandfertig innert 3 - 5 Werktagen, spese di spedizione aggiuntive. (EUR 16.41)
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal i… Mehr…
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix. Bücher, Hörbücher & Kalender / Bücher / Sachbuch / Herstellung & Technik / Herstellungs- & Verfahrenstechnik<
Nr. LAPFQ6H9EDO. Versandkosten:, Lieferzeit: 5 Tage, DE. (EUR 0.00)
1Da einige Plattformen keine Versandkonditionen übermitteln und diese vom Lieferland, dem Einkaufspreis, dem Gewicht und der Größe des Artikels, einer möglichen Mitgliedschaft der Plattform, einer direkten Lieferung durch die Plattform oder über einen Drittanbieter (Marketplace), etc. abhängig sein können, ist es möglich, dass die von eurobuch angegebenen Versandkosten nicht mit denen der anbietenden Plattform übereinstimmen.
The present work was carried out in the frame of a scientific cooperation between the Trento University and MIMEST spa (Italy), a company specialized in the production of parts by metal injection molding (MIM) of powders The cooperation was established to develop the applications of MIM products in the biomedical fields, with the production of both prosthesis and external tutors and surgery tools. The work has been carried out on cobalt alloys, titanium alloys, austenitic stainless steel and precipitation hardened stainless steels. The main focus of this research was properties optimization of these materials, there were several open points concerning the effect of the as sintered microstructure on some of the properties which are requested for the specific applications. The common approach was the study of the microstructural characteristics which are decisive in determining the properties, the possibility to modify them by either heat treatment or mechanical treatment, and the correlation with the specific properties. Only the work on cobalt and titanium alloys are described in detail. However, the work done on stainless steel is reported in two papers in the appendix.
Detailangaben zum Buch - Co AND Ti ALLOYS FOR BIOMEDICAL APPLICATIONS PRODUCED BY MIM
EAN (ISBN-13): 9783843352840 ISBN (ISBN-10): 3843352844 Gebundene Ausgabe Taschenbuch Erscheinungsjahr: 2010 Herausgeber: LAP Lambert Acad. Publ. 152 Seiten Gewicht: 0,244 kg Sprache: eng/Englisch
Buch in der Datenbank seit 2008-11-25T18:23:22+01:00 (Berlin) Detailseite zuletzt geändert am 2021-11-29T16:43:21+01:00 (Berlin) ISBN/EAN: 9783843352840
ISBN - alternative Schreibweisen: 3-8433-5284-4, 978-3-8433-5284-0