Deutsch
Deutschland
Anmelden
Tipp von eurobuch.de
Ähnliche Bücher
Weitere, andere Bücher, die diesem Buch sehr ähnlich sein könnten:
Buch verkaufen
Anbieter, die das Buch mit der ISBN 9783844317039 ankaufen:
Suchtools
Buchtipps
Aktuelles
Werbung
FILTER
- 0 Ergebnisse
Kleinster Preis: 49,99 €, größter Preis: 142,75 €, Mittelwert: 76,53 €
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - neues Buch

2011, ISBN: 9783844317039

ID: 755896068

Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Bücher > Fremdsprachige Bücher > Englische Bücher Taschenbuch 21.10.2011 Buch (fremdspr.), LAP Lambert Academic Publishing, .201

Neues Buch Buch.ch
No. 30384257 Versandkosten:zzgl. Versandkosten
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - neues Buch

ISBN: 9783844317039

ID: 0440610a7ff1b2bf56ea4233a7b63b85

Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Bücher / Fremdsprachige Bücher / Englische Bücher 978-3-8443-1703-9, LAP Lambert Academic Publishing

Neues Buch Buch.de
Nr. 30384257 Versandkosten:Bücher und alle Bestellungen die ein Buch enthalten sind versandkostenfrei, sonstige Bestellungen innerhalb Deutschland EUR 3,-, ab EUR 20,- kostenlos, Bürobedarf EUR 4,50, kostenlos ab EUR 45,-, Sofort lieferbar, DE. (EUR 0.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - neues Buch

ISBN: 9783844317039

ID: 730231252

Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Buch (fremdspr.) Bücher>Fremdsprachige Bücher>Englische Bücher, LAP Lambert Academic Publishing

Neues Buch Thalia.de
No. 30384257 Versandkosten:, Versandfertig in 2 - 3 Tagen, DE (EUR 0.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - neues Buch

ISBN: 9783844317039

ID: 163630058

Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Buch (fremdspr.) Bücher>Fremdsprachige Bücher>Englische Bücher, LAP Lambert Acad. Publ.

Neues Buch Thalia.at
No. 30384257 Versandkosten:MX (EUR 8.00)
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling: Machining Cost in Room Temperature and Preheated  End-Milling Of AISI D2 Tool Steel:  Comparison and Modeling - Mohamed Elhadie, A.N. Mustafizul Karim, A.K.M. Nurul Amin
Vergriffenes Buch, derzeit bei uns nicht verfügbar.
(*)
Mohamed Elhadie, A.N. Mustafizul Karim, A.K.M. Nurul Amin:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling: Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling - Taschenbuch

2011, ISBN: 9783844317039

ID: 615367871

LAP LAMBERT Academic Publishing, 2011-10-20. Paperback. Used:Good. Buy with confidence. Excellent Customer Service & Return policy. Ships Fast. Expedite Shipping Available., LAP LAMBERT Academic Publishing, 2011-10-20

gebrauchtes bzw. antiquarisches Buch Biblio.com
Ergodebooks
Versandkosten: EUR 14.13
Details...
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.