Mohsen Marani Barzani:Machinability Study of Aluminium-Silicon Alloy : The Influence of Silicon Morphology on Machinability When Al-Si-Cu-Fe Die Casting Alloy
- Taschenbuch 2013, ISBN: 3659477109
[EAN: 9783659477102], Neubuch, [PU: LAP LAMBERT Academic Publishing], nach der Bestellung gedruckt Neuware - Printed after ordering - Aluminium-silicon alloy has found extensive use in th… Mehr…
[EAN: 9783659477102], Neubuch, [PU: LAP LAMBERT Academic Publishing], nach der Bestellung gedruckt Neuware - Printed after ordering - Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good corrosion resistance. This project was undertaken to analyze the effect of silicon morphology on machinability when turning Al-Si-Cu-Mg alloy by PVD TiN coated insert. Various cutting speeds and feed rates were employed. The process was performed under dry cutting condition. Experiments revealed that surface roughness improved when cutting speed increased from 70 m/min to 250 m/min for all machining conditions. The results show that The workpiece containing Sb have the highest surface roughness value and highest cutting force in the most of cutting conditions with high ductility.The study also revealed that cutting force increased when feed rate was increased from 0.5 mm/rev to 0.15 mm/rev.The study should be especially useful to use some elements in casting process that are suitable to achieve the best surface roughness in machining process. 88 pp. Englisch, Books<
| | AbeBooks.deAHA-BUCH GmbH, Einbeck, Germany [51283250] [Rating: 5 (von 5)] NEW BOOK. Versandkosten:Versandkostenfrei. (EUR 0.00) Details... |
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Mohsen Marani Barzani:Machinability Study of Aluminium-Silicon Alloy
- Taschenbuch 2023, ISBN: 9783659477102
[ED: Taschenbuch], [PU: LAP LAMBERT Academic Publishing], Neuware - Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castabi… Mehr…
[ED: Taschenbuch], [PU: LAP LAMBERT Academic Publishing], Neuware - Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good corrosion resistance. This project was undertaken to analyze the effect of silicon morphology on machinability when turning Al-Si-Cu-Mg alloy by PVD TiN coated insert. Various cutting speeds and feed rates were employed. The process was performed under dry cutting condition. Experiments revealed that surface roughness improved when cutting speed increased from 70 m/min to 250 m/min for all machining conditions. The results show that The workpiece containing Sb have the highest surface roughness value and highest cutting force in the most of cutting conditions with high ductility.The study also revealed that cutting force increased when feed rate was increased from 0.5 mm/rev to 0.15 mm/rev.The study should be especially useful to use some elements in casting process that are suitable to achieve the best surface roughness in machining process., DE, [SC: 0.00], Neuware, gewerbliches Angebot, 220x150x6 mm, 88, [GW: 149g], Banküberweisung, PayPal, Internationaler Versand<
| | booklooker.deBuchWeltWeit Inh. Ludwig Meier e.K. Versandkosten:Versandkostenfrei, Versand nach Deutschland. (EUR 0.00) Details... |
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Mohsen Marani Barzani:Machinability Study of Aluminium-Silicon Alloy
- Taschenbuch 2013, ISBN: 3659477109
[EAN: 9783659477102], Neubuch, [PU: LAP LAMBERT Academic Publishing Okt 2013], This item is printed on demand - it takes 3-4 days longer - Neuware -Aluminium-silicon alloy has found exten… Mehr…
[EAN: 9783659477102], Neubuch, [PU: LAP LAMBERT Academic Publishing Okt 2013], This item is printed on demand - it takes 3-4 days longer - Neuware -Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good corrosion resistance. This project was undertaken to analyze the effect of silicon morphology on machinability when turning Al-Si-Cu-Mg alloy by PVD TiN coated insert. Various cutting speeds and feed rates were employed. The process was performed under dry cutting condition. Experiments revealed that surface roughness improved when cutting speed increased from 70 m/min to 250 m/min for all machining conditions. The results show that The workpiece containing Sb have the highest surface roughness value and highest cutting force in the most of cutting conditions with high ductility.The study also revealed that cutting force increased when feed rate was increased from 0.5 mm/rev to 0.15 mm/rev.The study should be especially useful to use some elements in casting process that are suitable to achieve the best surface roughness in machining process. 88 pp. Englisch, Books<
| | AbeBooks.deBuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany [57449362] [Rating: 4 (von 5)] NEW BOOK. Versandkosten:Versandkostenfrei. (EUR 0.00) Details... |
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Machinability Study of Aluminium-Silicon Alloy Mohsen Marani Barzani Author
- neues BuchISBN: 9783659477102
Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good … Mehr…
Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good corrosion resistance. This project was undertaken to analyze the effect of silicon morphology on machinability when turning Al-Si-Cu-Mg alloy by PVD TiN coated insert. Various cutting speeds and feed rates were employed. The process was performed under dry cutting condition. Experiments revealed that surface roughness improved when cutting speed increased from 70 m/min to 250 m/min for all machining conditions. The results show that The workpiece containing Sb have the highest surface roughness value and highest cutting force in the most of cutting conditions with high ductility.The study also revealed that cutting force increased when feed rate was increased from 0.5 mm/rev to 0.15 mm/rev.The study should be especially useful to use some elements in casting process that are suitable to achieve the best surface roughness in machining process. Trade Books>Trade Paperback>Science>Engineering>Engr Ref, LAP Lambert Academic Publishing Core >1<
| | BarnesandNoble.comnew in stock. Versandkosten:zzgl. Versandkosten. Details... |
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.
Machinability Study of Aluminium-Silicon Alloy Mohsen Marani Barzani Author
- neues BuchISBN: 9783659477102
Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good … Mehr…
Aluminium-silicon alloy has found extensive use in the automotive and aerospace industries due to its excellent castability, good thermal conductivity, low expansion coefficient and good corrosion resistance. This project was undertaken to analyze the effect of silicon morphology on machinability when turning Al-Si-Cu-Mg alloy by PVD TiN coated insert. Various cutting speeds and feed rates were employed. The process was performed under dry cutting condition. Experiments revealed that surface roughness improved when cutting speed increased from 70 m/min to 250 m/min for all machining conditions. The results show that The workpiece containing Sb have the highest surface roughness value and highest cutting force in the most of cutting conditions with high ductility.The study also revealed that cutting force increased when feed rate was increased from 0.5 mm/rev to 0.15 mm/rev.The study should be especially useful to use some elements in casting process that are suitable to achieve the best surface roughness in machining process. Trade Books>Trade Paperback>Science>Engineering>Engr Ref, KS OmniScriptum Publishing Core >1<
| | BarnesandNoble.comnew in stock. Versandkosten:zzgl. Versandkosten. Details... |
(*) Derzeit vergriffen bedeutet, dass dieser Titel momentan auf keiner der angeschlossenen Plattform verfügbar ist.